Peptide Decoding
New?New to peptides?Start here →
Decoding

Oligopeptide-10_Dosage, benefits & legal status

Also known as FAKALKALLKALKAL-NH2, oligopeptide 10

Published November 17, 2026

Fifteen residues built to punch holes in Gram-positive bacteria.

Skin appearanceSynthetic antimicrobial peptide (topical, 15 residues)Cosmetic
DoseSet by the finished product
FrequencyDaily, as directed by the product
RouteOn the skin (topical)
StatusCosmetic ingredient
CycledNot cycled

See how this dose compares across the library →

01

What is Oligopeptide-10?

Plain language first. The technical label stays, but it never stands alone.

Overview

A lab-designed peptide in acne products that breaks open the bacteria involved in breakouts.

The technical version

Oligopeptide-10 is a designed cationic amphipathic antimicrobial pentadecapeptide, FAKALKALLKALKAL-NH2, reported to bind bacterial lipoteichoic acid and disrupt Gram-positive membranes.

What it's used for

A topical antimicrobial peptide in acne and anti-dandruff formulas.

02

How does Oligopeptide-10 work?

What it does in the body, and where.

Oligopeptide-10 is FAKALKALLKALKAL with an amide on the end. The sequence is not a fragment of anything natural: it is a textbook designed amphipathic peptide, and you can read the design straight off it.

  1. 01
    Four lysines give it a positive charge
    Lysine is positively charged at skin pH. Bacterial surfaces are negatively charged, so charge is what makes the peptide land on a bacterium rather than on a skin cell.
  2. 02
    The rest is grease, arranged on one face
    Phenylalanine, alanine and leucine fill every other position. Wound into a helix, the charged and greasy residues separate onto opposite faces, which is the amphipathic arrangement that lets a peptide sit in a membrane.
  3. 03
    The named target is lipoteichoic acid
    Reference data describes it binding lipoteichoic acid on the bacterial surface, a molecule found in Gram-positive cell walls, and then disrupting membrane integrity so the cell loses its osmotic balance. The reported activity is against Gram-positive organisms including the acne bacterium and Staphylococcus aureus.
  4. 04
    There is a second claimed effect worth separating
    Lipoteichoic acid is also what triggers inflammation when bacteria break apart, so binding it is described as reducing pro-inflammatory cytokine release. That is a different claim from killing bacteria, and in acne the inflammation is much of the problem.
Pathway
THE PEPTIDE
Oligopeptide-10
ACTS ON
Gram-positive bacterial membranes
RESULT
Binds lipoteichoic acid on the bacterial surface
RESULT
Disrupts membrane integrity

A schematic of the compound's mechanism, not a diagnostic image.

03

What else is it used for?

Each use below carries its own evidence level. Approved means regulators have cleared it for that purpose. Investigational means it is in trials. Early research means it is being studied and is not established.

  • Acne-prone skin, the use it is formulated fornone
  • Dandruff and seborrheic dermatitis, named in reagent reference data as research applicationsnone
  • Athlete's foot, named in the same reference data as a research applicationnone

The published record

Research index

0

Papers about Oligopeptide-10 · this compound only

Searched: 466691-40-7, FAKALKALLKALKAL.

Europe PMC was searched on November 18, 2026 for these terms and returned nothing.

Counted from Europe PMC indexing, not read by a person.

Oligopeptide-10 vial rendering
Compound field notes

At a glance

Four things to know about Oligopeptide-10

01

Evidence

Cosmetic

02

Category

Skin and cosmetic

03

Common vial

Varies

04

Half-life

Not measured, and not the right question

04

How much, and do you cycle it?

The range, and whether you take breaks.

Set by the finished product, daily, as directed by the product. Not cycled Community practice

Used daily as part of a routine. Nothing about it suggests tolerance or a need for a break, though resistance to antimicrobial peptides is a real phenomenon in bacteria and nobody has studied it for this ingredient in use.

Compare this against the whole library →

05

How long does it stay in the body?

The half-life, and where the figure comes from.

Not measured, and not the right questionNo figure

No half-life has been published for this peptide. It is applied to the skin in a finished cosmetic rather than dosed into the bloodstream, so a circulating half-life would not describe anything useful. For an antimicrobial peptide meant to act on bacteria at the skin surface, how long it persists where it is applied matters more, and that has not been published.

You can compare this against the whole library to see where it sits.

06

How is it given?

Dosing context and source notes.
No draw available

Supplied as a ready-made solution, so there is nothing to mix.

No trial or label gives a dose for this peptide, so none is stated here. It is applied as a topical product at whatever concentration the manufacturer sets, and no supplier use level was found in anything read at source.

07

How do you store it?

Before mixing, and after.

Room temperature, out of light. Cap it tight after each use.

Oligopeptide-10 ships as a cream, gel, or serum. Keep it at room temperature away from sun and heat unless the label says otherwise. Refrigerating an emulsion can split the texture. Watch for color, smell, or separation changes and stop using it if any appear.

08

What are the side effects and cautions?

Known cautions and warnings for this compound.

Solubility, computed: 40% charged residues, 73% hydrophobic. Water usually sufficient.

A first-pass rule from peptide manufacturers' guidance. It does not account for disulfide bridges, salt form or how the powder was dried, and it predicts what should be easy rather than what will happen in your vial.

Who should avoid it

Check these before anything else.
  • A known allergy to this ingredient or to others in the same product
  • Broken, cracked, or actively irritated skin
  • Anyone treating acne that needs a medicine, because a cosmetic antimicrobial peptide is not an approved acne treatment

Stop and get help

These are emergencies. Seek care.
  • A rash that spreads beyond where you applied it
  • Swelling of the face, lips, or eyelids, or any trouble breathing
  • Burning that does not settle after rinsing it off

Common effects

Expected, and usually mild.
  • No human tolerability data was found. Laboratory assays report no irritation or sensitization.

Where this page says nothing is established, that means nobody has studied it, not that a compound is safe.

09

Is Oligopeptide-10 approved?

And where the numbers on this page come from.

Not as a medicine. Oligopeptide-10 is sold without a prescription as a cosmetic ingredient, which is a different thing from being approved as a drug.

What has happened recently

We have not yet written a full regulatory note for this compound. The status above is current as of the date shown.

Guides for this compound

Sources

  • MedChemExpress, Oligopeptide-10 product data sheet(2026)
    The reference sheet behind the identity and the mechanism description. CAS 466691-40-7, molecular formula C78H140N20O15, molecular weight 1598.07, sequence Phe-Ala-Lys-Ala-Leu-Lys-Ala-Leu-Leu-Lys-Ala-Leu-Lys-Ala-Leu with a C-terminal amide. It describes the peptide binding lipoteichoic acid on the surface of bacterial cell membranes, inducing osmotic imbalance by disrupting membrane integrity, and reducing release of pro-inflammatory cytokines, with broad-spectrum bactericidal activity against Gram-positive bacteria including the acne organism and Staphylococcus aureus, and reports no cytotoxicity, irritation, sensitization or mutagenicity in in vitro safety evaluations. Its own cited reference is a 2009 review of cosmeceuticals and peptides in Clinics in Dermatology, volume 27, pages 485 to 494, which was not opened at source here.
  • MedChemExpress, CAS 466691-40-7 reference entry (same supplier as the data sheet above)(2026)
    A second page from the same supplier as the sheet above, not an independent source, and labeled that way here. It is cited only because it prints two identifiers the data sheet does not: the InChIKey XWZAWHJNTHSHGD-SIDOVBMKSA-N and the full SMILES string, from which the sequence can be rebuilt residue by residue. It repeats the same formula, weight and Gram-positive activity as the sheet, which is repetition rather than confirmation.
  • Third-party copy of the European Union cosmetic ingredient inventory entry for OLIGOPEPTIDE-10, reference 57787(2010)
    A source from a different party than the supplier sheets, and the reason this card's description of the molecule does not rest on one company's data. It is a third-party copy of the European Union's cosmetic ingredient inventory, not the Commission's own page: the Commission's database serves its per-ingredient entries through a script this cannot run, and no Commission URL for this ingredient could be reached. The copy reports inventory reference 57787 with a source update of 15 October 2010, and describes the ingredient as a 15-unit synthetic peptide of alanine with leucine, lysine and phenylalanine. That is an independent confirmation of both the length and the composition: FAKALKALLKALKAL is fifteen residues of exactly those four amino acids and nothing else. It assigns the functions antimicrobial, deodorant and skin conditioning, which a second and unrelated third-party copy of the same inventory also reports. The inventory records no CAS number, so the CAS on this card still rests on supplier data even though the length and composition no longer do.